Under the driver's side knee panel. Here's a diagram which is not in the owner's manual (like wtf...) but matches the fuse numbering for the interior fuses as listed in the manual.
To access the fuse box you need to remove the knee panel, open the door and there's the side panel which just pops off once you get a good grip or a trim tool behind it, there's a couple screws there and then theres a couple screws at the bottom of the knee panel, the knee panel is held in with some plastic clips, reach under the steering wheel gap and give it a yank, you'll also have unplug the headlight switch once the panel is loose.
Sent from my Pixel 2 using Tapatalk
2018 Jeep Compass Trailhawk (GCM)
Last edited by dawm; 04-19-2018 at 05:34 PM.