My Jeep Compass Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
After upgrading my radio from a 130S to a 730N, I find my Uconnect no longer responds. After doing some research I found that the 730N has a built in Uconnect Hands Free Module (HFM), and that the Vehicles external HFM must be bypassed with a jumper kit to restore the vehicles microphone functionality.

Unfortunately I cannot find information on where the external HFM is located. I found only one source that stated the module is located directly below the radio behind the HVAC controls. But this is where my 110VAC power inverter is located.

Can anyone provide information on where the HFM is located??

Bob
 

·
Registered
Joined
·
5 Posts
Discussion Starter #2
Never mind. I found it when I removed the glove box.

FYI in my car it was against the passenger side, below the A-pillar.

No thanks to the dealer, but they did let me cancel the microphone I ordered and was going to use in lieu of tearing apart the dash to find it...
 
1 - 2 of 2 Posts
Top